News — Woodturning
How to Sand Burr & Figured Wood Without Tear-Out
Posted by CXS Tools at
Burr and figured wood are the most visually striking materials in woodworking, but their interlocked grain makes them uniquely prone to tear-out. This guide covers a complete sanding workflow, from scraping and fibre stabilisation through grit sequences, abrasive selection, and dust extraction, to help you preserve the figure and protect your health.
Hand Sanding vs Power Sanding on the Lathe: Which Wins?
Posted by CXS Tools at
Discover when to hand sand, when to power sand, and why the hybrid approach gives the best finish on your lathe projects. Practical guidance on technique, grit progression, dust safety, and choosing the right abrasives.
Abrasive Rolls vs Discs vs Strips: Which Format to Use
Posted by CXS Tools at
Not sure whether to buy abrasive rolls, sanding discs, or strips? This practical guide explains which format suits each tool and task, covering drum sanders, orbital sanders, woodturning, and panel work, with tips on grain types, dust reduction, and cost-per-use savings.
Power Sanding in Woodturning: Techniques and Tips for Better Results
Posted by CXS Tools at
A practical, expert-led guide to power sanding on the woodturning lathe, covering optimal lathe speed, the trailing angle technique, abrasive selection, grit progression, and essential dust safety advice for cleaner, safer results.
How to Sand a Wooden Bowl on the Lathe: A Step-by-Step Guide to a Flawless Finish
Posted by CXS Tools at
A step-by-step guide to sanding wooden bowls on the lathe, covering the hybrid power-and-hand sanding method, correct RPM settings, grit sequences, interior techniques, and essential dust safety advice from a woodturner with over 25 years of experience.